Everybody uses trash bags. We use them in kitchens, bathrooms, offices, common areas, industrial areas, and of course outside as well. Also known as trash liners, they exist to capture, store, and remove waste. It really is that easy. Every trash bag costs money, and they all get thrown away. You can save money… lots of money (more on that later) by choosing the right bag for the job.
When choosing the correct trash bag, consider the following:
The Capacity of a bag refers to the volume of trash that will fit inside the bag. Since most bags are used inside of trash cans and other waste receptacles, it is important to know the size of shape of the trash can to choose the correct trash bag. A general
There are two primary types of plastic Resins used to manufacture trash bags. High Density trash liners are fantastic for general office conditions because they can hold heavy loads if that trash does not have rough or sharp edges. Low Density liners, on the other hand, can better hold materials that may puncture or tear the bag. High Density liner thickness is measured in microns, and Low Density liner thickness is measured in mils. Plastic resins have advanced over the years and the best trash liners can use just 1/3 of the plastic resin compared to previous generations of liner technology.
The Max Load of a bag is defined as the maximum amount of weight that the liner can hold under ideal conditions. Many years ago, it was common knowledge that “thicker was better.” This is no longer the case. As a facility expert, you’ve probably heard or described the bag you need by talking in terms of its thickness. For example, a cleaning contractor might determine that they will use a 16-micron high density trash liner in a trash can. But what if the conversation was not about the thickness, but instead about the load? Using a trash liner best suited for the material load can often produce considerable savings because in many cases the current solution is overkill and a thinner bag will accomplish the job of capturing, storing, and removing waste.
Trash liners are manufactured using 3 types of Seals. Star Seals, Flat Seals, and Gusset Seals hold the plastic together. Most commercial trash liners are produced using a Star Seal that conforms well to the trash can, distributes the weight of the load evenly, and reduces the potential for leaking.
Sometimes the Color of a trash liner is important. For example, many hospitality teams will train staff to use black bags so that when the bag is carried through common areas, the contents aren’t visible to patrons and guests. Other times the color of a bag is part of a specific safety initiative such as red, blue, and yellow bags printed for infectious contents.
Other Facility Specific Factors that may influence your decision when purchasing liners are the location of the trash receptacle itself, an environmentally friendly initiative, interest in drawstring closure, flexible resins, and even bags impregnated with antimicrobial agents and odor counteractants.
Through our SmartSite™ Analysis program
Click the trash bag $avings graph below and an Action Representative will contact you to discuss your Savings Opportunity!